Pneumatic wrenches are basically screwdrivers with lots of attitude. Air Compressor Tools in over-simplified terms, they receive downward energy applied by compressed air and transform it into a twisting movement which is transferred to either a screwdriver bit or a socket mounted to the nose piece of the wrench. These contraptions are handy for breaking loose any baked-on or rusted-in threaded shafts. These tools may also be used to install high-torque bolts which are routinely used on moving machinery. In this article are reviews of three pretty good pneumatic wrenches that a fella might want to take a look at.

Ingersoll Rand tools are considered to be nicely crafted, top quality Airbrush Compressor products. This long established company markets a pretty brawny pneumatic wrench made to produce 180 ft/lbs of torque. This wrench also incorporated a built-in power regulator which accomplishes two significant tasks. First, this feature will keep you from driving a bolt too far. Secondly, it will regulate the intensity of torque as you are loosening a seized bolt, which may stop the bolt from snapping off inside the hole. This particular pneumatic wrench is rather costly at nearly $170, but this wrench may serve you well for many years to come.

Chicago Pneumatic is one more well-established manufacturer of pneumatic tools. This manufacturer also markets a pneumatic wrench that will be worth considering. Their model # CP724H includes an oil bath clutch to produce smooth rotations, while extending the life of this wrench. The integral torque regulator ensures that every action gets the appropriate level of power and speed. This device also comes with a plunger-style reverse valve for one-handed operation. At $160, this company’s wrench is nearly as pricey as the Ingersoll-Rand wrench, and happily it is nearly as well engineered.

Northern Industrial offers a less expensive pneumatic wrench for easier workloads and smaller finances. Their 3/8 inch drive wrench can deliver lots of torque and offers the same general features as the two wrenches reviewed above. The materials may not be a similar grade, but for about $90, you’ll still receive your money’s worth from this American made pneumatic wrench.

After you invest in your pneumatic wrench, you should invest in the correct-sized air compressor with no smaller than a 10 gallon tank. These devices also must have specially made sockets and bits which should be designed to withstand the high torque caused by this type of wrench.

If you normally work on auto engines or other moving equipment you probably have realized the value of a pneumatic wrench. You also should understand that it is a sensible plan to invest in the sturdiest and best made Airbrush Compressor Tools that you can pay for.

Comments are closed.